Brand New Innovative Tool Holders By Iscar Head The Way In Machining Productivity

Iscar's Heliturn model features a unique, double-sided insert with 4 cutting edges for Fast Metal Removal (FMR) turning. The cutting edge Heliturn is a tangentially clamped insert having a unique helical shaped cutting edge, useful for tremendous depths of cut and higher than common feed rate. The LNMX...-HT Heliturn insert is screw-clamped into the SLANR tool holder and held by the TLN ..-HT carbide seat. This seat has ground surfaces on the top and bottom, to provide perfect contact of the insert with the tool holders. The upper rake face of the insert is mounted level with the top of the tool holder to permit chips to flow across the insert, without being interfered by clamps or the tool holder body. The 4 curved helical cutting edges provide positive radial rake angles and soft penetration into the material being cut. The reduced forces and smaller loads assure better tool lifespan, elevated stability and the ability to use extraordinarily considerable depths of cut and greater feeds. The chipformer, manipulates and breaks the chip into rib type curved fragments which can easily be removed from the cutting area. This insert has a frontal clearance angle of 3.7 with a 6 side clearance angle to allow machining to a 90 shoulder. Depth of cut up to .315" and facing depths to .126" at up to .047" IPR are attainable with Heliturn.

When contrasted to CNMG/M 16... or WNMG/M 13... insert sizes with the alike corner radius, much enhanced tool life can be foreseeable when using the LNMX 1506..-HT insert. Iscar has recently released a smaller size to the Heliturn family - the LNMX 1104..R/L-HT insert and tool holder for the common application range of up to .197" depth of cut. The brand new insert features all of the precedence of the larger insert. This enhances the economical usefulness in the medium machining application compass. When compared to CNMG/M 43. 12... or WNMG/M 43. 08... insert sizes with the same corner radius, a far better tool life can be foreseen. The inserts are offered in .031, .047 and .063" tool nose radii. Heliturn inserts are available in the most exceptional carbide grades: IC9025, IC3028 , IC428, IC907, and IC908.

The external tool holders are presented in 1, 1.25 and 1.5" shank sizes. Boring bars are attainable in 1, 1.25 1.5 and 2" bar sizes. Also obtainable are exchangeable heads. These tool holders have Iscar's unique Hard Touch coating, which enhances/increases/expands/heightens/stretches holder life and disrupts corrosion. As a result of the placement of this insert, machining next to the tailstock is probable.

The high positive rake angle of these cutters allows 10-15% less power usage than normal tool holders at the same parameters.

By using Iscar's Heliturn tools, immense cost savings and profitability in lathe procedures is insured.

A Completely new 80 Degree Rhombic Insert with high helical cutting edge for high metal removal rates Iscar is unveiling the CNMX 1207..-HTW insert family. The unique insert has a very positive radial, helical cutting edge and a positive rake angle; a blending which substantially decreases the cutting forces. The insert's corner has a wiper configuration which generates high surface finish even at high feed conditions, which in abundant occasions can take out a finishing cut. The corner angle is 88 degrees which provides heightened strength. The CNMX inserts were developed for heavy machining applications. Their specific design ensures reputable, fast metal removal when using 80 degree rhombic inserts. They can be mounted on any standard tool holder that carries typical CNMG inserts, but the seat has to be replaced with a special seat: TCH 4. Iscar's R-clamp tool holders are highly suggested for heavy machining applications.

Some Basic Machinist Tools That You May Require To Complete Your Machining Jobs
When it comes to buying your own tools, things can get a bit confusing, especially if you are an at home or paid machinist. Buying complicated tools that may be hard to find is often a challenge.

Buy Safe Be Safe With Megger Tester
In the electrical industry there really is no margin for error. Strict guidelines have been put into place to maintain the highest of standards, and more importantly the safety of personnel.

Safety Instructions When Utilizing Power Tools
Power tools are becoming a basic part of the home tool kit. They make it easier to fix problems in the home as well as to complete Do It Yourself (DIY) projects and not have to rely on professional help.

Corded And Cordless Power Equipment - Which Are Regarded The Most Beneficial?
The DIY and the construction industry or market are awash with power tools of various types and of course financial values.

Saving You Hardware Headaches And Some Money: Getting The Ideal Cordless Drilling Machine
Whether you're an avid craftsman or an amateur just looking to fix things around the house, to buy a cordless drill can be a daunting task.